Hydrophobic wax, with immediate water cross-linking. Formulated with polymers that enhance the gloss of the bodywork while protecting it from weathering. Non-greasy and non-staining. Ideal for installations with Venturi system, as WAX ECO can be pre-diluted in water. Fast-drying without creating micro-droplets with a shining effect. It leaves no haloes in the drops that form near the mirrors. Even when overdosed, it does not grease the washing brushes.

METHOD OF USE:

Dosing pump: draw in the pure product by adjusting the suction to approx. 10/30 pulses depending on the amount of rinse water.

Scented wax for drying vehicles in self-service facilities. It leaves no haloes in the drops. The cationic emulsion protects and maintains the natural gloss of paints.

METHOD OF USE:

Dosing pump: draw in the neat product by adjusting the suction to approx. 10/30 pulses depending on the amount of rinse water.

With excellent water repellent performance even in very hard water. It keeps wash brushes clean and protects car bodies and paintwork from weathering.

METHOD OF USE:

Dosing pump: draw in the neat product by adjusting the suction to approx. 20/40 pulses depending on the amount of rinse water.

Cera idrofobizzante con una immediata reticolazione dell’acqua. Formulato con polimeri che esaltano la brillantezza della carrozzeria proteggendola dagli agenti atmosferici. Non unge e non sporca. Ideale per impianti con sistema Venturi, in quanto WAX ECO è prediluibile in acqua.

MODALITÀ D'USO:

Pompa dosatrice: far aspirare il prodotto puro regolando l’aspirazione a circa 20/40 impulsi in funzione della quantità dell’acqua di risciacquo.

It allows the immediate withdrawal of the water film, resulting in rapid and complete drying. It gives the bodywork an excellent shine: it is a concentrate of waxing substances of vegetable origin. It is non-greasy and leaves no haloes in the drops.

METHOD OF USE:

Wash tunnel: neat, drawn in from dosing pumps set at 10/20 g.

Gantry: neat, drawn in from dosing pumps set at 10/20 g.

It dries quickly and thoroughly, leaving no haloes in the drops that form near the mirrors. Ideal with hot waxing and for self-service facilities.

METHOD OF USE:

Wash tunnel: neat, drawn in from dosing pumps, set at 20-40 g.

Gantry: neat, drawn in from dosing pumps, set at 20-40 g.

Fast-drying without creating micro-droplets with a shining action. It leaves no haloes in the drops that form near the mirrors. Even when overdosed, it does not grease the washing brushes. Ideal for hard water. Particularly environmentally friendly composition. Free of hydrocarbons, mineral oils, excellent polishing effect.

METHOD OF USE:

Dosing pump: draw in the neat product by adjusting the suction to approx. 10/30 pulses depending on the amount of rinse water.

Fast-drying without creating micro-droplets with a shining action. It leaves no haloes in the drops that form near the mirrors. Even when overdosed, it does not grease the washing brushes.

METHOD OF USE:

Dosing pump: draw in the pure product by adjusting the suction to approx. 10/30 pulses depending on the amount of rinse water.

It leaves no haloes in the drops. The cationic emulsion protects and maintains the natural gloss of paints.

METHOD OF USE:

Dosing pump: draw in the neat product, set at 10/30 g.

Wax designed to optimise the washing and drying cycle with products from the same HF line with HyperFilm Protection nanotechnology that increases the protective process on the vehicle bodywork with a glossy, micro-repairing effect.

METHOD OF USE:

Dosing pump: 8/15 g per cycle